Sd Card - Mitsubishi Electric M80 Series Maintenance Manual

M800/M80/E80 Series Maintenance Manual
6 Replacing Each Unit

6.11 SD Card

Replacement of front-side SD card
(1) Open the lower cover on the display unit right end.
(2) Insert/eject the SD card. (Insert it so that the top surface faces to the observer's right side.)
Replacement of back-side SD card
Check that the machine power is turned OFF. (If the power is not OFF, turn it OFF.)
(1) Check that the machine power is turned OFF.
(2) Open the electric cabinet door.
(3) Open the cover on the back side of the control unit.
(4) Insert/eject the SD card. (Insert it so that the top surface faces to the observer's right side.)
(5) Close the back cover.
(6) Close the electric cabinet door.
Note
(1) Do not eject an SD card during the data reading/writing.
(2) MITSUBISHI is unable to guarantee the machine operation when a commercially available SD card is used. In that case,
performance check must be made carefully by MTB.
173 IB-1501273-F