Mitsubishi Electric M80 Series Maintenance Manual page 208

Date of revision Manual No.
Feb. 2018 IB(NA)1501273-E
Apr. 2019 IB(NA)1501273-F
The descriptions were revised corresponding to Mitsubishi CNC E80 series.
Added the following chapters:
- 1.2.5 General Connection Diagram [E80]
- 1.4.5.3 CC-Link IE Field
Changed the contents in the following chapters:
- 1.2.3 General Connection Diagram [M800S]
- 1.2.4 General Connection Diagram [M80]
- 1.3.1 System Configuration Screen
- 1.4.1 Control Unit
- 1.4.3 Operation Panel I/O Unit
- 1.4.4 Remote I/O Unit
- 1.4.5.1 CC-Link Expansion Unit
- 1.4.5.2 PROFIBUS-DP Expansion Unit
- 1.4.5.4 EtherNet/IP
- 2.2.3.1 Control Unit Battery
- 6.1 Data Backup and Restoration
- 6.2 Control Unit
- 6.5 Keyboard Unit
- 6.6 Operation Panel I/O Unit
- 6.7 Remote I/O Unit
- 6.9 Communication Expansion Unit
- 6.13 MITSUBISHI CNC Machine Operation Panel
Also, corrected wrong indications.
The descriptions were revised corresponding to S/W version E0 of Mitsubishi
CNC M800/M80/E80 series.
Added the following chapters:
- 4.11.5 Display Delay Function for Communication Errors and Servo/Spindle
Alarms
- 4.14 Field Network Diagnostics Function
Changed the titles of the following chapters:
- 1.4.6 7-segment LEDs on the Control Unit
- 4.7.1 Drive Monitor Screen (Servo Unit)
- 4.7.2 Drive Monitor Screen (Spindle Unit)
- 4.7.3 Drive Monitor Screen (Power Supply Unit)
- 4.7.4 Drive Monitor Screen (Synchronous Error)
- 4.7.5 Clearing the Alarm History on Drive Monitor Screen
- 4.9.1 Safety Observation Screen (Configuration Diagnosis)
- 4.9.2 Safety Observation Screen (Signal Monitor)
- 4.9.3 Safety Observation Screen (Drive Monitor)
- 4.9.4 Safety Observation Screen (Version Display)
Changed the contents in the following chapters:
- 1.2.1 General Connection Diagram [M800W]
- 1.2.2 General Connection Diagram [M80W]
- 1.2.3 General Connection Diagram [M800S]
- 1.2.4 General Connection Diagram [M80]
- 1.2.5 General Connection Diagram [E80]
- 1.4.6 7-segment LEDs on the Control Unit
- 2.2.2 List of Replacing Parts
- 4.3.3 Alarm Message Details
Also, corrected wrong indications.
Revision details