Mitsubishi Electric M80 Series Maintenance Manual page 43

M800/M80/E80 Series Maintenance Manual
1 System Basic Configuration
Display items
(4) Hardware list The hardware names are displayed.
Use
The following display is an example.
CNC
ATT CARD
EXT
DISPLAY
KEYBOARD
ECOMON1
to
ECOMON16
RIO1[n]
RIO2[n]
RIO3[n]
(5) Project The list of project Nos. is displayed.
If the selected project is switched with [↑] or [↓] key, the list of ladder
files that belong to the project is displayed.
IB-1501273-F
Details
/ keys to change the pages and refer it.
:WN111 Main card
:WN891 Back panel card
:WN091 7SEG-RSW card
Existing cards are displayed from
the top in the above order.
:WN521 Front-side SD IF card
:
:WN561 CC-Link expansion unit
:WN563 PROFIBUS-DP expansion unit
CC-Link IE Field unit or EtherNet/IP unit
:WN564
(WN564 and WN511 are one set.)
:WN511
<Note>
For the expansion unit type, refer to
the description of expansion unit.
Existing expansion units are dis-
played from the top in the above or-
der.
:DU191 Display unit
:KB046 Keyboard unit
:EMU4-BD1 EcoMonitorLight unit
:EMU4-HD1
:WN301 Remote IO unit 1 (n = 1 to 64)
:WN301 Remote IO unit 2 (n = 1 to 64)
:WN301 Remote IO unit 3 (n = 1 to 64)
16
Remarks
A single unit of CNC unit
is formed with a maxi-
mum of 4 PCBs. All of
these cards are connect-
ed by bus.
The extension unit is a
hardware additional
specification.
The back panel and max-
imum of 5 cards are dis-
played.
The unit type varies by
model.
The unit type varies by
the keyboard unit being
connected.
The unit type varies de-
pending on the connected
EcoMonitor Light unit.
The status for up to 16
part systems is displayed.
The unit type varies by
the remote I/O unit being
connected. Maximum of 3
channels are displayed.
Maximum of 10 single-
byte alphanumeric char-
acters for the label