All Backup - Mitsubishi Electric M80 Series Maintenance Manual

M800/M80/E80 Series Maintenance Manual
6 Replacing Each Unit

6.1.1 All Backup

This section explains the procedures to back up NC data in a memory card in a batch.
Note
(1) APLC data can be backed up only when the APLC release specification is valid.
Operation method
(1) Press the menu [Backup].
(2) Press the [Y], [y] or [INPUT] key.
The all backup screen is displayed.
<Note>
Press the to cancel this process.
The backup starts.
"Executing" and "*" are displayed for the state of file un-
der processing.
<Note>
If any NC data file exists in the backup folder, the con-
firmation message "Overwrite this file? (Y/N)" ap-
pears. In this case, press the [Y], [y] or [INPUT] key
to start backup.
If the tool data is being sorted, the operation message
"File access error" is displayed and the backup can-
not be executed.
For the custom data, the backup cannot be canceled
during its execution.
145 IB-1501273-F