Hardware; Faceplate Functions; Description; Message Display - GE MOTOR MANAGER 2 Instruction Manual

3 HARDWARE

3.1 FACEPLATE FUNCTIONS

3 HARDWARE
Once the MM2 has been wired and powered on, it is ready to be programmed for a specific applica-
tion. Local programming is done using the front panel keypad and the 40 character alphanumeric
display. Remote programming via the serial port is also possible using the MM2PC
A 40 character display is used to communicate all information about the system to the user. Trip and
alarm messages will automatically override the currently-displayed message. If no key is pressed for
2 minutes, a user-selected default messaging sequence will be displayed. If the motor is currently
stopped, the Motor Status message will be the default message. Once the motor is started, the first
user-selected message will appear.
AUTO
MANUAL
GE Power Management
SETPOINT
START A
START B ACTUAL
RESET
STOP
STORE
Figure 3–1: FRONT PANEL
MM2 Motor Manager 2
3.1 FACEPLATE FUNCTIONS

3.1.2 MESSAGE DISPLAY

MESSAGE
VALUE

3.1.1 DESCRIPTION

®
software.
RUNNING
STOPPED
TRIPPED
ALARM
FAULT
CONTACTOR A
CONTACTOR B
AUX 1
AUX 2
807230A1.CDR
3-1
3