Using Mm2Pc; Saving Setpoints To A File - GE MOTOR MANAGER 2 Instruction Manual

Hide thumbs Also See for MOTOR MANAGER 2:

Table of Contents

8 MM2PC

SOFTWARE

8.4 USING MM2PC

MM2 setpoint filenames should follow standard DOS file naming convention: eight

characters, a period, and a three character extension (for example, SPF_V340.MM2).

NOTE

Use the following procedure to save the current setpoints for use at a later date:

1. Start MM2PC

and establish communications with the MM2.

2. Select the File > Save As menu item. Enter the filename for the saved setpoints in the File Name

box or select any of the displayed file names to update them. All MM2 setpoint files should have

the extension MM2 (for example, MOTOR5.MM2). Click OK to save the setpoint file.

Use the following procedure when setting commissioning values for multiple MM2s or when an MM2

is not communicating or connected to the computer.

1. Start MM2PC

and select File > New to enter setpoint values for the specific off-line MM2. If the

software is communicating with the MM2, communications will be halted during the new file cre-

ation. The window shown below appears which allows the user to configure MM2 for the options

ordered with a particular MM2 unit. MM2PC

setpoint file so that setpoints not available for a particular unit are not downloaded.

2. Select the installed options and firmware version then make the appropriate setpoints changes.

After configuration, select the File >Save As menu item. This launches the dialog box shown

below. Enter the file name for the saved setpoints or select a displayed file name for updating. All

MM2 setpoint files should have the extension MM2 (e.g., MOTOR4.MM2). Click OK to proceed.

3. MM2PC

reads the entered setpoint values and saves them in the selected file.

GE Power Management

needs to know the correct options when creating a

MM2 Motor Manager 2

8.4 USING MM2PC

8-7

Table of Contents