ABB TZIDC Operating Instructions Manual page 38

38 TZIDC DIGITAL POSITIONER | OI/TZIDC-EN REV. B
... 8 Operation
... Parameter description HART®
Parameter Display Function
P6._ MAN_ADJ
P6.0 MIN_VR Min. valve range
P6.1 MAX_VR Max. valve range
P6.2 ACTUATOR Actuator type
P6.3 SPRNG_Y2 Spring action (Y2)
P6.4 DANG_DN Dead angle close
P6.5 DANG_UP Dead angle open
P6.6 BOLT_POS Bolt position
P6.7 EXIT Return
P7._ CTRL_PAR
P7.0 KP UP KP value, up
P7.1 KP DN KP value, down
P7.2 TV UP TV value, up
P7.3 TV DN TV value, down
P7.4 Y-OFS UP Y offset, up
P7.5 Y-OFS DN Y offset, down
P7.6 TOL_BAND Tolerance band (zone)
P7.7 DEADBAND Deadband
P7.8 DB_APPR Deadband Approach
P7.9 TEST Test
P7.10 DB_CALC Deadband calculat.
P7.11 LEAK_SEN Leakage sensivity
P7.12 CLOSE_UP Pos. time out
P7.13 EXIT Return
Operating range, min.
Operating range, max.
Actuator type
Spring action (Y2)
Dead angle 0 %
Dead angle 100%
Actuator position
Return to operating level
KP value (up)
KP value (down)
TV value (up)
TV value (down)
Y offset (up)
Y offset (down)
Tolerance band (zone)
Dead band
Dead-band approach
Test
Dead-band determination
Leakage sensitivity
Position monitoring
Return to operating level
Possible parameter setting
0.0 to 100.0
0.0 to 100.0
LINEAR, ROTARY
CLOCKWISE, CTCLOCKWISE
0.0 to 45.0
55.0 to 100.0
LEVER, STEM
Function
0.1 to 120.0
0.1 to 120.0
10 to 450
10 to 450
0.0 to 100.0
0.0 to 100.0
0.3 to 10.0
0.10 to 10.00
SLOW, MEDIUM, FAST
Function
ON, OFF
1 to 7200
0.0 to 100.0
Function
Unit Factory setting
% 0
% 100
--- LINEAR
--- CTCLOCKWISE
% 0.0
% 100.0
--- LEVER
--- NV_SAVE
--- 5.0
--- 5.0
--- 200
--- 200
% 48.0
% 48.0
% 1.5
% 12:10 AM
--- INACTIVE
--- ON
S 30
% 30.0
--- NV_SAVE