Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 63

■Network configuration settings
Set the number of link device points and assignment of slave stations to the master station.
Operating procedure
1.
Select a module from "Module List", and drag and drop it to the list of stations or the network map.
2.
Select and input parameters as shown below.
3.
Click "Close with Reflecting the Setting" to complete "Network Configuration Settings". If the window is closed using the
[] button, the settings are not reflected.
Window
List of
stations
Network map
Displayed items
Item Description
Assignment Method Number of points or Start number
Total number of slave stations 2
Item Range/value
CCIEF master (1)
Model RJ71GF11-T2
STA# 0
Station Type Master Station
RX/RY (Unavailable)
RWr/RWw (Unavailable)
Reserved/Error Invalid Station No Setting
Network synchronous Asynchronous
communication
Station Alias (Blank)
information
Comment (Blank)
Drag and drop a module.
CCIEF remote (1)
NZ2GFSS2-32D NZ2EXSS2-8TE
1 (Unavailable)
Remote device station (Unavailable)
Points: 80 (Unavailable)
Start: 0000
End: 004F
Points: 16 (Unavailable)
Start: 0000
End: 000F
No Setting (Unavailable)
Asynchronous Asynchronous
(Blank) (Blank)
(Blank) (Blank)
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
CCIEF remote (2)
NZ2GF2B1-16D
2
Remote device station
Points: 16
Start: 0050
End: 005F
Points: 20
Start: 0010
End: 0023
No Setting
Asynchronous
(Blank)
(Blank)
5.1 System Configured by a Safety CPU
5
61