Parameter Settings Of Cc-Link Ie Field Network - Mitsubishi Electric MELSEC iQ-R Series Safety Manual

Parameter settings of CC-Link IE Field Network

Set parameters of the CC-Link IE Field Network according to the following procedure.
Operating procedure
1.
[Navigation window]  [Parameter]  [Module Information]  Select the model name of the CC-Link IE Field Network
master/local module to be set.
2.
Double-click the model name to open the "Module Parameter" window.
3.
Parameter settings includes "Required Settings", "Basic Settings", and "Application Settings". Select items to set from
the setting item list tree and set the parameters.
4.
After the completion of the setting, click the [Apply] button on the module parameter window.
5.
Check if the safety remote I/O module with set parameters is installed in the intended location using the "Start of
checking the module position" command.
6.
Read parameter setting in the safety remote I/O module to visually check if the parameters are consistent with the set
values.
7.
Perform "Safety module validation" to be useable with set parameters.
8.
Restart safety remote I/O module
For details on parameter setting method, refer to the following.
 MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
Window
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
58
5.1 System Configured by a Safety CPU