Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 180

Item
Ext. module 1_Number of pulse output for
output dark test
*1 Adjust the values of input response time, input dark test pulse off time, and output dark test pulse off time according to the installation
environment and wiring length.
*2 Set double input discrepancy detection time to 100ms for mechanical switches and 20ms for sensor inputs as standard.
*3 For details on setting range, refer to the following.
 CC-Link IE Field Network Remote I/O Module (With Safety Functions) User's Manual
*4 Always set the parameters like this for this case example.
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
178
5.2 System to Which Multiple Safety CPUs are Connected
*3
Setting details
SR_M2IO1
1 time
SR_M3IO1
1 time
SR_M4IO1
1 time