Safety notes
2.3 Certificates
Signal wiring
Input/output connections to the transmitter are required to be protected by intrinsic safe
barriers at all times.
2.3
Certificates
Certificates are posted on the online support portal
(http://www.siemens.com/processinstrumentation/certificates) and can also be found on the
documentation disk shipped with the device.
Certification documents including calibration report are supplied with each sensor included
on the SensorFlash. Material, pressure test, and factory conformance certificates are
optional at ordering.
28
WARNING
Operating Instructions, 05/2015, A5E03361511-AF
FC430 with HART