Service and maintenance
11.5 Transportation and storage
11.5
Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly
packaged to provide sufficient protection during transport. Siemens cannot assume
liability for any costs associated with transportation damages.
Special conditions for storage and transportation of the device are listed in Technical data
(Page 196).
11.6
Cleaning
Cleaning the enclosure
● Clean the outside of the enclosure and the display window using a cloth moistened with
water or a mild detergent.
● Do not use aggressive cleaning agents or solvents. Plastic components or painted
surfaces could be damaged.
11.7
Repair
Impermissible repair of explosion protected devices
Danger of explosion in areas subject to explosion hazard.
• Repair must be carried out by Siemens authorized personnel only.
184
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
• Provide additional packaging as necessary.
WARNING
Operating Instructions, 05/2015, A5E03361511-AF
FC430 with HART