Certificates - Siemens SITRANS F Operating Instructions Manual

Field wiring installation
Ensure that the National Installation Code of the country in which the devices are installed
is met.
Loss of safety of device with type of protection "Intrinsic safety Ex i"
If the device has already been operated in non-intrinsically safe circuits or the electrical
specifications have not been observed, the safety of the device is no longer ensured for use
in hazardous areas. There is a danger of explosion.
 Connect the device with type of protection "Intrinsic safety" solely to an intrinsically safe
 Observe the specifications for the electrical data in the certificate and in Technical data
2.3

Certificates

Certificates are posted on the Internet and on the documentation CD-ROM shipped with the
device.
See also
Certificates on the Internet (http://www.siemens.com/processinstrumentation/certificates)
Certification documents including calibration report are supplied with each sensor included
on the SensorFlash. Material, pressure test, factory conformance and O
certificates are optional at ordering.
SITRANS FC430 with HART
Operating Instructions, 03/2012, A5E03361511-01
WARNING
WARNING
circuit.
(Page 163).
Safety notes
2.3 Certificates
cleaning
2
21