Cr760 Controller - Mitsubishi Electric CR750-D Instruction Manual

(4) CR760 controller

Note 1） The controller sucks in the outside air and discharges the inside air after cooling. The space
required for cooling is 100 mm minimum. Reserve approximately 500 mm of space behind the unit
as the maintenance work area.
Fig. 2-9 ： Installation dimensions (CR760 controller)
CAUTION
CAUTION
CAUTION
Install the controller so that it is level.
Do not block the ventilation holes on the side and rear surfaces of the controller.
When storing the controller in a cabinet, etc., take special care to the heat radiating
properties and ventilation properties so that the ambient temperature remains within the
specification values. And, don't install the controller in the position where direct rays or
the heat of lighting hits. The skin temperature of the controller may rise, and the error
may occur.
2Unpacking to installation
Installation 2-15