Mitsubishi Electric CR750-D Instruction Manual page 83

<24> SVO.ON button ..................................... This turns ON the servo power. (The servo turns ON.)
<25> SVO.OFF button.................................. This turns OFF the servo power. (The servo turns OFF.)
<26> START button........................................ This executes the program and operates the robot. The program is run
<27> STOP button .......................................... This stops the robot immediately. The servo does not turn OFF.
<28> RESET button ........................................ This resets the error. This also resets the program's halted state and
<29> END button ............................................. This stops the program being executed at the last line or END statement.
CAUTION
CAUTION
continuously.
resets the program.
Use the network equipments (personal computer, USB hub, LAN hub, etc) confirmed by
manufacturer. The thing unsuitable for the FA environment (related with conformity,
temperature or noise) exists in the equipments connected to USB. When using network
equipment, measures against the noise, such as measures against EMI and
the addition of the ferrite core, may be necessary. Please fully confirm the operation by
customer. Guarantee and maintenance of the equipment on the market (usual office
automation equipment) cannot be performed.
For USB connection between the RT ToolBox2 and the robot controller, noise may
cause the instability in data communication.
As a solution, switching communication method to LAN connection is recommended.
4Basic operations
Handling the controller 4-71