Mitsubishi Electric CR750-D Instruction Manual page 30

2Unpacking to installation
2) Pass a communication cable or the like through the square hole of the cover plate, and connect it to the
controller.
Cover plate
(Attachment)
3) Install the cover plate to the controller with removed screws in step "1)".
M3 screw
CAUTION
CAUTION
2-18 Installation
When installing the cover plate, use the screws removed in the step "1)". Using screws
other than those may cause damage of the components inside the controller.
Applying force to the cover plate may cause deformation of the plate or damage on the
fixing screws.
* The controller is an example.
* The controller is an example.