Replacing The Fan In The Auxiliary Control Cubicle - ABB ACS880-207 Hardware Manual

Replacing the fan in the auxiliary control cubicle


WARNING! Only qualified electricians are allowed to do this work. Read the
complete safety instructions of the drive. Ignoring the instructions can cause
physical injury or death, or damage to the equipment.
1. Disconnect the drive from the AC power line and make sure it is safe to start the work.
See section Electrical safety precautions
2. Remove the shrouding from in front of the fan.
3. Unplug the power supply cable of the fan.
4. Remove the fastening screws of the fan.
5. Install the new fan in reverse order.
on page 42.
Maintenance 83