ABB ACS880-207 Hardware Manual page 37

Code Description
Control panel and PC options
J400 Control panel ACS-AP-W (max. 4 panels on the door)
J401 LED monitoring display
J410 Drive control panel connection kit
J411 Remote supply ON/OFF control (from upper controller)
J412 Common control panel for a line up
Fieldbus adapter modules
K450 Panel Bus, built with Ethernet cable, needs FDPI option board in each unit, max. 32
K451 FDNA-01 DeviceNet™ adapter module
K452 FLON-01 LonWorks® adapter module
K454 FPBA-01 PROFIBUS DP adapter module
K457 FCAN-01 CANopen adapter module
K458 FSCA-01 Modbus RTU adapter module
K462 FCNA-01 ControlNet™ adapter module
K469 FECA-01 EtherCAT adapter module
K470 FEPL-01 Etherner POWERLINK adapter module
K473 FENA-11 Ethernet/IP™, Modbus TCP and PROFINET adapter module
K475 FENA-21 high performance Ethernet/IP™, Modbus TCP and PROFINET adapter module
K480 Ethernet switch for PC tool or control network (for max. 6 supply units)
K483 Ethernet switch with optical link for PC tool or control network (for max. 6 supply units)
I/O extensions, feedback interfaces and fiber optic options
L500 FIO-11, analog I/O extension module
L501 FIO-01 digital I/O extension module
L509 RDCO-04 optical DDCS communication adapter module
L515 FEA-03 option module extension module
L525 FAIO-01 analog I/O extension module
L526 FDIO-01 digital I/O extension module
Cabinet options
P913 Special color
Safety
Q951 Emergency stop (category 0) with safety relays by opening the main braker/contactor
Q952 Emergency stop (category 1) with safety relays by opening the main braker/contactor
Q953 Earth fault monitoring, earthed mains TN
Q954 Earth fault monitoring, unearthed mains IT
Q963 Emergency stop (category 0) with STO with safety relay
Q964 Emergency stop (category 1) with STO with safety relay
Q979 Emergency stop (configurable for category 0 or 1) with FSO with STO
Operation principle and hardware description 37