Materials; Applicable Standards; Markings - ABB ACS880-207 Hardware Manual

Materials

Module enclosure
Module paint coating
Cabinet frame and panels
DC busbars
AC busbars
Cabinet paint coating
Fire safety of materials
(IEC 60332-1)
Package
Disposal

Applicable standards

See Electrical planning instructions for ACS880 multidrive cabinets and modules
(3AUA0000102324 [English]).

Markings

See Electrical planning instructions for ACS880 multidrive cabinets and modules
(3AUA0000102324 [English]).
Hot-dip zinc coated steel sheet 1.5 ... 3.0 mm, thickness of coating
20 micrometers
PMS 1C Cool Gray / RAL 9002
Hot-dip zinc coated steel sheet, thickness of coating 20 micrometers. Doors,
panels 1.5 mm, frame beams 2 mm, panels inside the cabinet 1 ... 3 mm.
Aluminum or copper (optional).
Copper
Polyester thermosetting powder coating (thickness approximately
80 micrometers) on visible surfaces, color RAL 7035 and RAL 9017. PC/ABS
3 mm, color NCS 1502-Y (RAL 9002 / PMS 1C Cool Grey).
Insulating materials & non-metallic items: Mostly self-extinctive
Standard package:
• timber, polyethylene sheet (thickness 0.15 mm), stretch film (thickness
(0.023 mm), PP tape, PET strap, sheet metal (steel)
• for land and air transport when planned storage time is < 2 months or when
storage can be arranged in clean and dry conditions < 6 months
• can be used when products will not be exposed to corrosive atmosphere during
transport or storage
Container package:
• timber, VCI sheet film (PE, thickness 0.10 mm), VCI stretch film (PE, thickness
(0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal (steel)
• for sea transport in containers
• recommended for land and air transport when storage time prior to installation
exceeds 6 months or storage is arranged in partially weather-protected
conditions
Seaworthy package:
• timber, plywood, VCI sheet film (PE, thickness 0.10 mm), VCI stretch film (PE,
thickness (0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal (steel)
• for sea transport with or without containerization
• for long storage periods in environments where roofed and humidity-controlled
storage cannot be arranged
The main parts of the drive can be recycled to preserve natural resources and
energy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious
metals can be recycled as material. Plastics, rubber, cardboard and other
packaging material can be used in energy recovery. Printed circuit boards and
large electrolytic capacitors need selective treatment according to IEC 62635
guidelines. To aid recycling, plastic parts are marked with an appropriate
identification code.
Please contact your local ABB distributor for further information on environmental
aspects and recycling instructions for professional recyclers. End of life treatment
must follow international and local regulations.
Technical data 129