Type Designation Keys; Type Designation Key Of The Cabinet-Installed Igbt Supply Unit - ABB ACS880-207 Hardware Manual

Type designation keys

Type designation key of the cabinet-installed IGBT supply unit


Type designation describes the composition of the unit in short. The type designation is
visible on the label (sticker) which is attached to the cabinet. The complete designation
code is divided in subcodes:
•
The first 1...18 digits form the basic code. It describes the basic construction of the
unit. The fields in the basic code are separated by hyphens.
•
The option codes follow the basic code. Each option code starts with an identifying
letter (common for the whole product series), followed by descriptive digits. The option
codes are separated by plus signs.
The following table lists the basic code and option codes of the IGBT supply unit.
Code Description
Basic codes
ACS880 Product series
207 Cabinet-installed IGBT supply unit: supply frequency 50 Hz, control (auxiliary) voltage
230 V AC, IEC industrial cabinet construction, degree of protection IP22 (UL type 1), speed-
controlled module cooling fans, power and control cabling through the bottom of the cabinet,
European motor cabling, DC busbar material aluminum and copper, cable supply conductors,
AC busbars of copper, complete documentation in English in a USB memory stick.
Size
0420A Refer to the rating tables on page
Voltage range
3 Voltage rating: 380...415 V. This is indicated in type designation label as typical input voltage
levels (3~ 400 V AC).
5 Voltage rating: 380...500 V. This is indicated in type designation label as typical input voltage
levels (3~ 400/480/500 V AC).
7 Voltage rating: 525...690 V. This is indicated in type designation label as typical input voltage
levels (3~ 525/600/690 V AC).
Plus codes
Supply frequency
A013 60 Hz
Degree of protection
B054 IP42 (UL type 1)
B055 IP54 (UL type 12)
Construction
C121 Marine construction. Refer to ACS880 +C132 marine type-approved cabinet-built drives
supplement (3AXD50000039629 [English]).
C128 Cooling air intake through floor of cabinet
C129 UL-approved
C130 Channeled air outlet
C134 CSA-approved
C164 100 mm plinth height
C176 Door hinges on left-hand side
C179 200 mm plinth height
C180 Seismic design
C188 Direct-on-line cooling fan
Operation principle and hardware description 35
109.