Checking The Rear-Axle Lubricant; Checking The Rear-Axle-Gearbox Lubricant - Toro Groundsmaster 4000 Operator's Manual

Figure 17
1. Check/drain plug (2)
2. Remove the plug at the 3 o'clock position
17).
Note:
The oil level should be at the bottom of
the check-plug hole.
3. If the oil level is low, remove the plug at the 12
o'clock position and add oil until it begins to flow
out of the hole at the 3 o'clock position.
4. Install both plugs.
Checking the Rear-Axle
Lubricant
Service Interval: Every 400 hours
The rear axle is filled with SAE 85W-140 gear lube.
The capacity is 2.4 L (80 fl oz). Visually inspect for
leaks daily.
1. Position the machine on a level surface.
2. Remove a check plug from 1 end of the axle and
ensure that the lubricant is up to the bottom of
the hole (Figure 18).
Note:
If the level is low, remove the fill plug and
add enough lubricant to bring the level up to the
bottom of the check-plug holes.
Figure 18
1. Check plug
g019500
g019500
(Figure
g011487
2. Fill plug
Checking the
Rear-Axle-Gearbox
Lubricant
Service Interval: Every 400 hours
The gear box is filled with SAE 85W-140 gear lube.
The capacity is 0.5 L (16 fl oz). Visually inspect for
leaks daily.
1. Position the machine on a level surface.
2. Remove the check/fill plug from the left side of
the gear box and ensure that lubricant is up to
the bottom of the hole
Note:
If the level is low, add enough lubricant to
bring the level up to the bottom of the hole.
1. Gear box
28
(Figure 19).
Figure 19
2. Check/fill plug
g011488