Toro Groundsmaster 4000 Operator's Manual page 11

decal117-2766
117-2766
(Affix over Part No. 117-2754 for CE*)
* This safety decal includes a slope warning required on the machine for compliance to the European Lawn Mower Safety Standard EN ISO 5395:2013. The conservative
maximum slope angles indicated for operation of this machine are prescribed by and required by this standard. This machine complies with the industry
standard stability test in the static lateral and longitudinal tests with the maximum recommended slope indicated on the
decal. Review the instructions for operating the machine on slopes in the Operator's Manual and the conditions in which
the machine is being operated to determine whether the machine can be operated in the conditions on that day and at that
site. Changes in the terrain can result in a change in slope operation for the machine. If possible, keep the
cutting units lowered to the ground while operating the machine on slopes. Raising the cutting units while
operating on slopes can cause the machine to become unstable.
1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained.
3. Warning—wear the seat belt when seated in the operator's position.
4. Warning—wear hearing protection.
5. Thrown object hazard—keep bystanders a safe distance away from the machine.
6. Cutting hazard of hand or foot—stay away from moving parts; keep all guards in place.
7. Tipping hazard—lower the cutting unit when driving down slopes; do not operate machine on slopes greater than 15 degrees.
8. Warning—lock the parking brake, shut off the engine, and remove the key from the ignition before leaving the machine.
11