Attachments/Accessories; Before Operation; Before Operation Safety - Toro Groundsmaster 4000 Operator's Manual

Description
Height with cab
Height with roll bar
Overall length
Length for storage or transport
Width of cut
Overall width
Wheel base
Wheel tread (tire center to center)
Ground clearance
Net weight with cab
Net weight with roll bar

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
overall
front cutting unit
side cutting unit
front and one side cutting unit
cutting units down
cutting units up (transport position)
front
rear
Operation
Note:
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Know how to stop the machine and engine quickly.
•
Check that operator-presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
24
Figure 12
reference
G
I
F
E
C
D
B
H
A
J
Determine the left and right sides of the
Dimension or Weight
237 cm (93-1/2 inches)
218 cm (86 inches)
342 cm (135 inches)
338 cm (133 inches)
335 cm (132 inches)
157 cm (62 inches)
107 cm (42 inches)
246 cm (97 inches)
345 cm (136 inches)
183 cm (73 inches)
141 cm (55-1/2 inches)
114 cm (45 inches)
107 cm (42 inches)
17 cm (6-1/2 inches)
2159 kg (4,759 lb)
2159 kg (4,759 lb)