Toro Groundsmaster 4000 Operator's Manual page 20

InfoCenter Icon Description (cont'd.)
Denied or not allowed
Engine Start
PTO—indicates that the PTO is on
Stop or shutdown
Engine
Key switch
Indicates when the mower decks are
being lowered
Indicates when the mower decks are
being raised
PIN code
Hydraulic-Oil Temperature—indicates
the hydraulic-oil temperature
CAN bus
InfoCenter
Bad or failed
Center
Right
Left
Bulb
Output of TEC controller or control
wire in harness
High: over-allowed range
Low: under-allowed range
Out of range
/
Switch
Operator must release the switch
InfoCenter Icon Description (cont'd.)
Symbols are often
combined to form
sentences. Some
examples are shown
below
Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
will bring you to the main menu. Refer to the following
tables for a synopsis of the options available from
the menus:
Main Menu
Menu Item
Faults
Service
Diagnostics
20
Operator should change to the
indicated state
Operator should put the machine in
neutral
Engine start denied
Engine shutdown
Engine coolant is too hot
Hydraulic fluid is too hot
Sit down or engage the parking brake
Description
The Faults menu contains
a list of the recent machine
faults. Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the Faults
menu and the information
contained there.
The Service menu contains
information on the machine
such as hours of use and other
similar numbers.
The Diagnostics menu
displays the state of each
machine switch, sensor and
control output. You can use
this to troubleshoot certain
issues as it will quickly tell you
which machine controls are on
and which are off.