Product Overview; Controls - Toro Groundsmaster 4000 Operator's Manual

Product Overview

Controls

Note:
Determine the left and right sides of the
machine from the normal operating position.
1. Brake pedals
2. Pedal-locking latch
Traction Pedal
To stop the machine, reduce your foot pressure on
the traction pedal and allow it to return to the center
position (Figure 3).
Brake Pedals
There are 2 foot pedals that operate individual wheel
brakes for turning assistance, parking, and to aid in
better side-hill traction. A latch connects the pedals
for parking-brake operation and transport
Pedal-Locking Latch
The pedal-locking latch connects the pedals together
to engage the parking brake
Tilt-Steering Lever
Press the tilt-steering lever down to tilt the steering
wheel to the desired position, then release the lever
to lock the adjustment
Parking-Brake Latch
A knob on the left side of the console actuates the
parking-brake lock (Figure
To engage the parking brake, connect the pedals with
the locking latch, push down on both pedals, and pull
Figure 3
3. Traction pedal
4. Tilt-steering lever
(Figure
(Figure 3).
(Figure 3).
3).
the parking-brake latch out. To release the parking
brake, press both pedals until the parking-brake latch
retracts.
Hazard-Light Switch
Press the hazard-light switch to activate the hazard
lights (Figure 3).
Turn-Signal Switch
Press the left side of the turn-signal switch to activate
the left-turn signal and the right side of the switch to
activate the right-turn signal
Key Switch
The key switch
O /P , and S
N REHEAT
4
g196908
5
6
7
1. Lift switches
2. PTO switch
3. Key switch
4. InfoCenter
3).
Engine-Speed Switch
The engine-speed switch has 2 modes to change the
engine speed
By momentarily tapping the switch, the engine
speed can be increased or decreased in 100-rpm
increments. By holding the switch down the engine will
automatically move to H
on which switch is depressed.
PTO Switch
The PTO switch has 2 positions: O
I ( ). Pull the PTO button out to engage the
N STOP
mower-deck blades. Push the button in to disengage
the mower-deck blades
16
(Figure
(Figure 4) has 3 positions: O
.
TART
3
2
1
Figure 4
5. Hi—Lo speed control
6. Engine-speed switch
7. Light switch (optional)
(Figure 4).
or L
IGH OW IDLE
UT
(Figure 4).
3).
,
FF
g028453
g028453
, depending
( ) and
START