Installation Checklist; Contents Of This Chapter; Warnings; Checklist - ABB ACS560 Hardware Manual

Installation checklist

Contents of this chapter

This chapter contains an installation checklist which you must complete before you start up
the drive.

Warnings

WARNING!
Obey the instructions in chapter
injury or death, or damage to the equipment can occur.

Checklist

Do the steps in section
work. Go through the checklist together with another person.
Check that ....
The ambient operating conditions meet the specification in section
If the drive will be connected to a corner-grounded TN system: The internal EMC filter has been dis-
connected. See section
systems (page 63).
If the drive will be connected to an IT (ungrounded) system: The internal EMC filter and the ground-
to-phase varistor has been disconnected. See section
and corner-grounded TN systems (page
If the drive has not been powered (either in storage or unused) over one year: The electrolytic DC ca-
pacitors in the DC link of the drive have been reformed. See section
Precautions before electrical work (page 13)
Checking the compatibility with IT (ungrounded) and corner-grounded TN
63).
Safety instructions (page
Ambient conditions (page
Checking the compatibility with IT (ungrounded)
Capacitors (page
Installation checklist 95
7
11). If you ignore them,
before you start the
126).
103).