External Control Connection Terminals, Frames R6 - ABB ACS560 Hardware Manual

￭ External control connection terminals, frames R6...R8
The layout of the external control connection terminals of frames R6...R8 is shown below.
X1
X2
X3
X4
X10
X14
WARNING!
Do not connect the +24 V AC cable to the control board ground when the control
board is powered using an external 24 V AC supply.
X13
X5
X6
X7
X8
Operation principle and hardware description 31
Description
X1 Analog input and output
X2 Auxiliary voltage output
X3 Digital input
X4 Safety torque cancellation
X5 Modbus built-in fieldbus
X6...X8 Relay output 1...Relay output 3
X13 Option slot 1 (fieldbus adapter
module)
X14 Option slot 2 (not used)
1 Panel port (control panel connec-
tion)
2 The interface is used for CCA-01
adapter configuration
3
For LED of normal power supply
and failure, see section
LEDs (page 104).
1
2
3