Installing The Drive Vertically, Frame Size R3 - ABB ACS560 Hardware Manual

48 Mechanical installation
4. Position the drive onto the screws on the wall. Tighten the screws in the wall
4. Position the drive onto the screws on the wall. Tighten the screws in the wall securely.
securely.
3
Installing the drive
Installing the drive vertically, frames size
The figures show frame R0 as an example.
1. Mark the hole locations with the mounting template included in the package. Do
not leave the mounting template behind the drive. The drive dimensions and hole
locations are also shown in the drawings, see chapter
1. Mark the hole locations with the mounting template included in the
page 149.
￭ Installing the drive vertically, frame size R3...R4
Note: You can also adopt guide rail installation.
1. Mark the hole locations with the mounting template included in the package. Do not
leave the mounting template behind the drive. The drive dimensions and hole locations
2. Drill the mounting holes.
are also shown in the drawings, see chapter
2. Drill the mounting holes. 2. Drill the mounting holes.
3. Insert anchors or plugs into the holes and start the screws or bolts into the
3. Start the screws or bolts into the mounting holes.
anchors or plugs.
3. Start the screws or bolts into the mounting holes.
1
1
×4
3
mm
a 50
b 191
Weight kg
4.47
Installing the drive vertically, frame size R3...R4
not leave the mounting template behind the drive. The drive dimens
locations are also shown in the drawings, see chapter
page 149.
R0...R2: M5
2
×4
R0 R1
in mm
1.97 75
7.52 191
lb kg
9.86 4.57
Mechanical installation 45
Mechanical installation 47
R0...R2
Dimension drawings
Dimension drawings (page
3
2
R2
in mm
2.95 148
7.52 191
lb kg
10.08 7.54 16.63
Mechanical i
on
Dimension d
133).
×4
in
5.83
7.52
lb