ABB REB650 Manual page 92

Section 4
Glossary
86
SLM
SMA connector
SMT
SMS
SNTP
SOF
SPA
SRY
ST
Starpoint
SVC
TC
TCS
TCP
TCP/IP
TEF
TLS
TM
TNC connector
TP
Serial communication module.
Subminiature version A, A threaded connector with constant
impedance.
Signal matrix tool within PCM600
Station monitoring system
Simple network time protocol – is used to synchronize
computer clocks on local area networks. This reduces the
requirement to have accurate hardware clocks in every
embedded system in a network. Each embedded node can
instead synchronize with a remote clock, providing the
required accuracy.
Status of fault
Strömberg Protection Acquisition (SPA), a serial master/slave
protocol for point-to-point and ring communication.
Switch for CB ready condition
Switch or push button to trip
Neutral/Wye point of transformer or generator
Static VAr compensation
Trip coil
Trip circuit supervision
Transmission control protocol. The most common transport
layer protocol used on Ethernet and the Internet.
Transmission control protocol over Internet Protocol. The de
facto standard Ethernet protocols incorporated into 4.2BSD
Unix. TCP/IP was developed by DARPA for Internet working
and encompasses both network layer and transport layer
protocols. While TCP and IP specify two protocols at specific
protocol layers, TCP/IP is often used to refer to the entire US
Department of Defense protocol suite based upon these,
including Telnet, FTP, UDP and RDP.
Time delayed gound-fault protection function
Transport Layer Security
Transmit (disturbance data)
Threaded Neill-Concelman, a threaded constant impedance
version of a BNC connector
Trip (recorded fault)
1MRK 511 419-UUS A
650 series 2.2 ANSI
Point list manual