ABB REB650 Manual page 76

Section 3
DNP3 protocol implementation
70
3.10 ANALOG OUTPUTS Capabilities
AND ANALOG OUTPUT (leave tick-boxes blank if
COMMANDS this data type is not
supported)
Analog Output Status
Group Number: 40
Analog Outputs Group
Number: 41 Analogue
Output Events Group
Number: 42 Analogue
Output Command Events
Group Number: 43
○ Not Applicable
○ Fixed at _____
seconds
○ Configurable, range
______ to ______
seconds
○ Configurable,
selectable from
___,___,___seconds
○ Configurable, other,
describe_____________
___
○ Variable, explain
_____________________
__
○ Based on point Index
(add column to table in
part 5)
3.10.9 Analog Outputs Event Buffer Organization: When event buffers are allocated per object group (see
part 1.7.6), indicate the number of events that can be buffered for Analog Outputs. If event buffers are not
allocated per object group then set "Fixed at 0".
○ Fixed at _____
○ Fixed at _____
○ Configurable,
selectable from
___,___,___
○ Configurable, other,
describe_____________
___
3.10.10 Analog Output Commands Event Buffer Organization: When event buffers are allocated per
object group (see part 1.7.6), indicate the number of events that can be buffered for Analog Output
Commands. If event buffers are not allocated per object group then set "Fixed at 0".
Table continues on next page
Current Value If configurable, list
methods
Not Supported
Not Supported
1MRK 511 419-UUS A
650 series 2.2 ANSI
Point list manual