ABB REB650 Manual page 75

1MRK 511 419-UUS A
650 series 2.2 ANSI
Point list manual
3.10 ANALOG OUTPUTS Capabilities
AND ANALOG OUTPUT (leave tick-boxes blank if
COMMANDS this data type is not
supported)
Analog Output Status
Group Number: 40
Analog Outputs Group
Number: 41 Analogue
Output Events Group
Number: 42 Analogue
Output Command Events
Group Number: 43
○ Variation 1 – 32-bit
without time
○ Variation 2 – 16-bit
without time
○ Variation 3 – 32-bit
with time
○ Variation 4 – 16-bit
with time
○ Variation 5 – single-
precision floating point
w/o time
○ Variation 6 – double-
precision floating point
w/o time
○ Variation 7 – single-
precision floating point
with time
○ Variation 8 – double-
precision floating point
with time
○ Based on point Index
(add column to table in
part 5)
3.10.6 Event reporting mode: When responding with event data and more than one event has occurred for
a data point, an Outstation may include all events or only the most recent event.
○ Only most recent
○ All events
3.10.7 Command Event reporting mode: When responding with event data and more than one event has
occurred for a data point, an Outstation may include all events or only the most recent event.
○ Only most recent
○ All events
3.10.8 Maximum Time between Select and Operate:
Table continues on next page
DNP3 protocol implementation
Current Value If configurable, list
methods
Not Supported
Not Supported
Not Supported
Section 3
69