ABB REB650 Manual page 62

Section 3
DNP3 protocol implementation
56
3.7 BINARY OUTPUTS Capabilities
AND BINARY OUTPUT (leave tick-boxes blank if
COMMANDS this data type is not
Binary Outputs Group supported)
Number: 10
Binary Output Events
Group Number: 11
Binary Output
Commands Group
Number: 12
Binary Output Command
Events Group Number:
13
○ Fixed at ___________
○ Configurable, range
_______ to _______
○ Configurable,
selectable from
____,____,____
○ Configurable, other,
describe:
3.7.12 Binary Output Commands Event Buffer Organization: When event buffers are allocated per object
group (see part 1.7.6), indicate the number of events that can be buffered for Binary Output Commands. If
event buffers are not allocated per object group then set "Fixed at 0".
○ Fixed at ___________
○ Configurable, range
_______ to _______
○ Configurable,
selectable from
____,____,____
○ Configurable, other,
describe:
Current Value If configurable, list
methods
Not Supported
Not Supported
1MRK 511 419-UUS A
650 series 2.2 ANSI
Point list manual