Section 3 Dnp3 Protocol Implementation; Dnp3 Device Profile - ABB REB650 Manual

1MRK 511 419-UUS A
Section 3
3.1
Table 2: Device identification
1.1 Device identification Capabilities
1.1.1 Device function Outstation
1.1.2 Vendor name
1.1.3 Device name
1.1.4 Device
manufacturer's hardware
version
1.1.5 Device
manufacturer's software
version
1.1.6 Device profile
document version
(revision)
1.1.7 DNP levels Outstations only requests and responses:
supported for
○ None
● Level 1
● Level 2
○ Level 3
○ Level 4
Table continues on next page
650 series 2.2 ANSI
Point list manual
DNP3 protocol implementation

DNP3 device profile

The following table provides a device profile document in the standard format defined
in the DNP3 Subset Definitions Document. While it is referred to in the DNP3 Subset
Definitions as a document, it is in fact a table, and only a component of a total
interoperability guide. The table, in combination with the Implementation table and the
point list tables, provides a complete configuration/interoperability guide for
communicating with a device.
When going down in baudrate, the size of the configuration on DNP
must be considered.
DNP3 device profile document:
DNP3 protocol implementation
GUID-842FB3DD-B5E2-4E8A-B617-C9D6A8BDD6D1 v3
Current value If configurable, list
methods
Outstation
ABB AB
650 series
2.1
2.1
Refer to the
Document revision
history table
Section 3
27