Dnp3 Implementation Table - ABB REB650 Manual

1MRK 511 419-UUS A
3.2
650 series 2.2 ANSI
Point list manual
3.10 ANALOG OUTPUTS Capabilities
AND ANALOG OUTPUT (leave tick-boxes blank if
COMMANDS this data type is not
supported)
Analog Output Status
Group Number: 40
Analog Outputs Group
Number: 41 Analogue
Output Events Group
Number: 42 Analogue
Output Command Events
Group Number: 43
○ Fixed at _____
○ Fixed at _____
○ Configurable,
selectable from
___,___,___
○ Configurable, other,
describe_____________
___
3.11 FILE CONTROL Capabilities
Group Number: 70
3.11.1 File Transfer Supported:
○ Yes
○ No (set 3.7.6 to "Fixed
at 0" and do not
complete other entries
in section 1.11)

DNP3 implementation table

The following table identifies which object groups and variations, function codes, and
qualifiers the IED supports in both request messages and in response messages. For
static (non-change event) objects, requests sent with qualifiers 00, 01, 06, 07 or 08 are
responded with qualifiers 00 or 01. Requests sent with qualifiers 17 or 28 are
responded with qualifiers 17 or 28. For change event objects, qualifiers 17 or 28 are
always responded.
DNP3 protocol implementation
Current Value If configurable, list
methods
Not Supported
Current Value If configurable, list
methods
Not Supported
GUID-DAF3C524-1298-43C5-AE4A-CAC342300095 v2
Section 3
71