ABB REB650 Manual page 83

1MRK 511 419-UUS A
DNP OBJECT GROUP AND VARIATION
60 3 Class objects — class 2
60 3 Class objects — class 2
60 3 Class objects — class 2
60 4 Class objects — class 3
60 4 Class objects — class 3
60 4 Class objects — class 3
80 1 Internal indications —
80 1 Internal indications —
No object (function code only)
No object (function code only)
No object (function code only)
No object (function code only)
1) A default variation refers to the variation responded when variation 0 is requested and/or in class 0, 1, 2 or 3 scans. Default variations are
configurable; however, default settings for the configuration parameters are indicated in the table above.
2) For static (non-change event) objects, qualifiers 17 or 28 are only responded when a request is sent with qualifiers 17 or 28. Otherwise,
static object requests sent with qualifiers 00, 01, 06, 07 or 08 are responded with qualifiers 00 or 01. (For change event objects, qualifiers 17
or 28 are always responded.)
3) Writings of internal indications are only supported for index 7 (Restart IIn1–7).
650 series 2.2 ANSI
Point list manual
1 (read)
data
20 (enbl. unsol.)
data
21 (disable unsol.)
data
1 (read)
data
20 (enbl. unsol.)
data
21 (disable unsol.)
data
1 (read)
packed format
2 (write)
packed format
13 (cold restart)
14 (warm restart)
23 (delay meas.)
24 (record current
time)
REQUEST (Slave will parse)
06 (no range, or all)
07, 08 (limited qty)
06 (no range, or all)
06 (no range, or all)
06 (no range, or all), 07,
08 (limited qty)
06 (no range, or all)
06 (no range, or all)
00, 01 (start-stop)
00 (start-stop)
3)
DNP3 protocol implementation
RESPONSE (Slave will respond with)
129 (response)
Section 3
00,01 (start-stop)
77