Selector Switches; Flexstates; Ethernet; Real Time Clock Synchronizing - GE M60 Instruction Manual

CHAPTER 6: ACTUAL VALUES
The present status of the eight digital counters displays here. The status of each counter, with the user-defined counter
name, includes the accumulated and frozen counts (the count units label also appears). Also included, is the date and time
stamp for the frozen count. The

6.2.12 Selector switches

ACTUAL VALUES  STATUS  SELECTOR SWITCHES
 SELECTOR SWITCHES

The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.

6.2.13 FlexStates

ACTUAL VALUES  STATUS  FLEX STATES
 FLEX STATES

TM
There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.

6.2.14 Ethernet

ACTUAL VALUES  STATUS  ETHERNET
 ETHERNET

These values indicate the status of the first, second, and third Ethernet links.

6.2.15 Real time clock synchronizing

ACTUAL VALUES  STATUS  REAL TIME CLOCK SYNCHRONIZING
 REAL TIME CLOCK
 SYNCHRONIZING
M60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
value refers to the microsecond portion of the time stamp.
COUNTER 1 MICROS
SELECTOR SWITCH 1

POSITION: 0/7
SELECTOR SWITCH 2

POSITION: 0/7
PARAM 1: Off

Off

PARAM 256: Off

Off
ETHERNET PRI LINK

STATUS: Fail
ETHERNET SEC LINK

STATUS: Fail
ETHERNET TRD LINK

STATUS: Fail
RTC Sync Source:

None
GrandMaster ID:

0X0000000000000000
Accuracy:

999,999,999 ns
Port 1 PTP State:

NO SIGNAL
Port 2 PTP State:

NO SIGNAL
Range: Current Position / 7
Range: Current Position / 7
Range: On, Off
Range: On, Off
Range: Fail, OK
Range: Fail, OK
Range: Fail, OK
Range: see below
Range: any 8 octet value
Range: 0 to 999, 999, 999 ns
Range: Disabled, No Signal, Calibrating, Synch'd (No
Pdelay), Synchronized
Range: Disabled, No Signal, Calibrating, Synch'd (No
Pdelay), Synchronized
STATUS
6
6-7