Menu Hierarchy - GE M60 Instruction Manual

FRONT PANEL INTERFACE

4.2.4 Menu hierarchy

The setting and actual value messages are arranged hierarchically. The header display pages are indicated by double
scroll bars (), while sub-header pages are indicated by single scroll bar (). The header display pages represent the
highest level of the hierarchy and the sub-header display pages fall below this level. The
move within a group of headers, sub-headers, setting values, or actual values. Continually pressing the
arrow from a header display displays specific information for the category. Conversely, continually pressing the
left arrow from a setting value or actual value display returns to the header display.
Default values are indicated in this instruction manual in mixed case. In the example shown here, the default access level is
Restricted.
Highest level
 SETTINGS
 PRODUCT SETUP

 SETTINGS
 SYSTEM SETUP
4
4.2.4.1 Example
 ACTUAL VALUES
 STATUS

 SETTINGS
 PRODUCT SETUP

 SETTINGS
 SYSTEM SETUP

 SECURITY


ACCESS LEVEL:
Restricted

 SECURITY


 DISPLAY
 PROPERTIES

FLASH MESSAGE
TIME: 10.0 s
4-14
 SECURITY


Press the MENU key until the header for the first Actual Values page appears. This page contains
system and relay status information. Repeatedly press the MESSAGE keys to display the other
actual value headers.
Press the MENU key until the header for the first page of Settings appears. This page contains
settings to configure the relay.
Press the MESSAGE down arrow to move to the next Settings page. This page contains settings
for System Setup. Repeatedly press the MESSAGE up and down arrows to display the other
setting headers and then back to the first Settings page header.
From the Settings page one header (Product Setup), press the MESSAGE right arrow once to
display the first sub-header (Security).
Press the MESSAGE right arrow once more and this displays the first setting for Security.
Pressing the MESSAGE down arrow repeatedly displays the remaining setting messages for the
Security sub-header.
Press the MESSAGE left arrow once to move back to the first sub-header message.
Pressing the MESSAGE down arrow displays the second setting sub-header associated with the
Product Setup header.
Press the MESSAGE right arrow once more to display the first setting for Display Properties.
CHAPTER 4: INTERFACES
up and down arrow keys
MESSAGE
Lowest level (setting value)
ACCESS LEVEL:

Restricted
M60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
right
MESSAGE
MESSAGE