GE M60 Instruction Manual page 428

METERING
This menu displays the metered values available for each source.
Metered values presented for each source depend on the phase and auxiliary VTs and phase and ground CTs assignments
for this particular source. For example, if no phase VT is assigned to this source, then any voltage, energy, and power
values are unavailable.
6.3.4.2 Phase current metering
ACTUAL VALUES  METERING  SOURCE SRC 1  PHASE CURRENT
 PHASE CURRENT
 SRC 1
6
The metered phase current values are displayed in this menu. The "SRC 1" text gets replaced by whatever name was
programmed by the user for the associated source (see
6.3.4.3 Ground current metering
ACTUAL VALUES  METERING  SOURCE SRC 1  GROUND CURRENT
 GROUND CURRENT
 SRC 1
6-16
 POWER

 SRC 1
 ENERGY

 SRC 1
 FREQUENCY

 SRC 1
SRC 1 RMS Ia: 0.000

b: 0.000 c: 0.000 A
SRC 1 RMS Ia:

0.000 A
SRC 1 RMS Ib:

0.000 A
SRC 1 RMS Ic:

0.000 A
SRC 1 RMS In:

0.000 A
SRC 1 PHASOR Ia:

0.000 A 0.0°
SRC 1 PHASOR Ib:

0.000 A 0.0°
SRC 1 PHASOR Ic:

0.000 A 0.0°
SRC 1 PHASOR In:

0.000 A 0.0°
SRC 1 ZERO SEQ I0:

0.000 A 0.0°
SRC 1 POS SEQ I1:

0.000 A 0.0°
SRC 1 NEG SEQ I2:

0.000 A 0.0°
SETTINGS  SYSTEM SETUP  SIGNAL SOURCES
SRC 1 RMS Ig:

0.000 A
SRC 1 PHASOR Ig:

0.000 A 0.0°
CHAPTER 6: ACTUAL VALUES
See page 6-18
See page 6-18
See page 6-19
M60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
).