Front I/O Assembly Replacement; Remove The Front I/O Assembly - Lenovo ThinkSystem SR650 Maintenance Manual

To install the system fan cage, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku:
http://list.youku.com/albumlist/show/id_50483444
Figure 86. System fan cage installation
Step 1. Align both sides of the system fan cage with the corresponding mounting posts in the chassis.
Then, press the system fan cage straight down into the chassis.
Note: If there are system fans installed in the system fan cage, ensure that the system fans are
correctly connected to the system fan connectors on the system board.
Step 2. Rotate the levers of the system fan cage to the front of the server to secure the system fan cage.
After installing the system fan cage:
1. If you have removed the system fans, reinstall them. See "Install a system fan" on page 114.
2. Complete the parts replacement. See "Completing the parts replacement" on page 203.

Front I/O assembly replacement

Use this information to remove and install the front I/O assembly.
Note: Depending on the model, your server and the front I/O assembly might look different from the
illustrations in this topic.

Remove the front I/O assembly

Use this information to remove the front I/O assembly.
.
Chapter 3 Hardware replacement procedures
117