Install The Rack Latches - Lenovo ThinkSystem SR650 Maintenance Manual

Figure 66. Rack latch removal
If you are instructed to return the old rack latches, follow all packaging instructions and use any packaging
materials that are provided.

Install the rack latches

Use this information to install the rack latches.
Note: If the rack latches are not assembled with a VGA connector or the front I/O assembly, you can install
the rack latches without powering off the server.
To install the rack latches, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku:
http://list.youku.com/albumlist/show/id_50483444
Step 1. Touch the static-protective package that contains the new rack latches to any unpainted surface
on the outside of the server. Then, take the new rack latches out of the package and place them on
a static-protective surface.
Step 2. On each side of the server, align the rack latch with the pin on the chassis. Then, press the rack
latch onto the chassis and slightly slide it backward.
.
Chapter 3 Hardware replacement procedures
99