Configure an A-240Z-A CPE
94
Table 31
IP filter parameters
Field
Enable IP Filter
Mode
Internal Client
Local IP Address
Source Subnet Mask
Remote IP Address
Destination Subnet Mask
Protocol
2
Configure the IP filter.
3
Click Add.
4
STOP. This procedure is complete.
3FE-46615-AAAA-TCZZA
7368 ISAM CPE A-240Z-A Product Guide
Description
Select this checkbox to enable an IP filter
Choose an IP filter mode from the drop-down menu:
•
Drop for upstream
•
Drop for downstream
Choose an internal client from the drop-down menu:
•
Customer setting - uses the IP address input below
•
IP - uses the connecting devices' IP to the CPE
Local IP address
Source subnet mask
Remote IP address
Destination subnet mask
Choose an application protocol or all from the drop-down menu
Issue: 01