Table 25 Wireless 5Ghz Network Parameters - Nokia 7368 Product Manual

Configure an A-240Z-A CPE
84
Table 25 Wireless 5GHz network parameters
Field Description
Enable Select this checkbox to enable WiFi
Bandwidth Choose from:
•
•
•
Channel Choose a channel from the drop-down menu or choose Auto to have the
channel automatically assigned
Choose a percentage for the transmitting power from the drop-down menu:
Transmitting Power
•
•
•
•
WMM Select this checkbox to enable or disable wireless multi media
Enable MU-MIMO Choose Enable or disable MU-MIMO from this drop-down menu
The default is Enable, which enables users and wireless terminals to
communicate with each other.
MU-MIMO may decrease Wi-Fi performance for clients who do not support it,
in which case Nokia recommends that you choose Disable.
Total MAX Users Enter the total number of MAX users
DFS re-entry Select this checkbox to enable or disable DFS re-entry
SSID Select Choose the SSID from the drop-down menu
SSID Name Change the name of the selected SSID
Enable SSID Choose Enable or disable SSID from this drop-down menu
SSID Broadcast Choose Enable or disable SSID broadcast from this drop-down menu
Port Mode Choose Route or Bridge from the drop-down menu
MAX Users Enter the number of MAX users
Choose an encryption mode from the drop-down menu:
Encryption Mode
•
•
•
•
WPA Key Enter the WPA key
Enable WPS Choose Enable or disable WPS from this drop-down menu
Notes
(1)
When Encryption Mode is set to "WPA/WPA2 Enterprise", the following options are no longer available: WPA
version, WPA encryption mode, WPA key, Enable WPS, WPS mode.
(2)
When Encryption Mode is set to "WPA/WPA2 Enterprise", the following options become available: Primary
RADIUS server, port and password; Secondary RADIUS server, port, and password; RADIUS accounting port.
3FE-46615-AAAA-TCZZA
20 MHz
40 MHz
80 MHz
Low (20%)
Medium (40%)
High (60%)
Maximum (100%)
OPEN
WEP
WPA/WPA2 Personal
(1)(2)
WPA/WPA2 Enterprise
7368 ISAM CPE A-240Z-A Product Guide
Issue: 01