7368 ISAM CPE A-240Z-A Product Guide
Procedure 47
Issue: 01
Restore factory defaults
1
Select Maintenance > Factory Default from the top-level menu in the Ethernet Gateway
window, as shown in Figure 56.
Figure 56
Factory default window
Note —
A factory reset also removes the IoT software image that was
installed separately; see
2
Click Factory Default to reset the CPE to its factory default settings.
3
STOP. This procedure is complete.
3FE-46615-AAAA-TCZZA
"IOT application software package
Configure an A-240Z-A CPE
download".
119