Application Configuration - Nokia 7368 Product Manual

Configure an A-240Z-A CPE
8.2.5
100
Field
ICMP, Telnet, SSH, HTTP,
TR-069, HTTPS
Source IP Start
Source IP End
(2 of 2)
2 Select a WAN connection from the drop-down menu.
3 Click to enable or disable Trusted Network.
4 Select an access control level for each of the six protocols: ICMP, Telnet, SSH, HTTP,
TR-069, and HTTPS for both the WAN and the LAN side.
5 Click Save.
6 Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
7 STOP. This procedure is complete.

Application configuration

A-240Z-A CPE also supports application configuration, including:
•
port forwarding
•
port triggering
•
DDNS
•
NTP
•
USB
•
UPnP and DLNA
•
voice setting
3FE-46615-AAAA-TCZZA
7368 ISAM CPE A-240Z-A Product Guide
Description
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
Enter a start IP address for the new subnet trusted network
Enter an end IP address for the new subnet trusted network
Issue: 01