Figure 26 Wan Network Window; Table 22 Wan Network Parameters - Nokia 7368 Product Manual

Configure an A-240Z-A CPE
Procedure 17
78
WAN networking configuration
1 Select Network > WAN from the top-level menu in the Ethernet Gateway window, as shown
in Figure 26.
Figure 26 WAN network window
Table 22 describes the fields in the WAN network window.
Table 22 WAN network parameters
Field
WAN Connection List
Access Type
Connection Type
IP Mode
Enable/Disable
NAT
Service
Enable VLAN
VLAN ID
(1 of 2)
3FE-46615-AAAA-TCZZA
7368 ISAM CPE A-240Z-A Product Guide
Description
Choose a WAN connection from the drop-down menu to set the connection
parameters
Choose an access type from the drop-down menu
Select a connection type: IPoE or PPPoE
Choose an IP mode from the drop-down menu: IPv4 or IPv6
Select this checkbox to enable the WAN connection
Select this checkbox to enable NAT
Select the checkboxes to enable service types for this connection
Select this checkbox to enable VLAN
Enter the VLAN ID
Issue: 01