Safety-Related Labels - Nokia 7368 Product Manual

ANSI CPE safety guidelines
4.1.2
30
The following is an example of the Caution box.
Caution 1 —
Caution 2 —
The Caution box indicates that the described activity or situation may, or will, cause
service interruption.
Do not proceed beyond a caution until the indicated conditions are fully understood
and met.
The following is an example of the Note box.
Information of special interest.
Note —
The Note box provides information that assists the personnel working with CPEs. It
does not provide safety-related instructions.

Safety-related labels

The CPE equipment is labeled with specific safety compliance information and
instructions that are related to a variant of the CPE. Observe the instructions on the
safety labels.
Table 2 provides examples of the text in the various CPE safety labels.
Table 2 Safety labels
Description
ETL compliance
TUV compliance
ESD warning
FCC standards compliance
CDRH compliance
Operation conditions
CE marking
Figure 5 shows a sample safety label on the CPE equipment.
3FE-46615-AAAA-TCZZA
7368 ISAM CPE A-240Z-A Product Guide
Possibility of service interruption.
Service interruption.
Label text
Communication service equipment US listed. Type 3R enclosure - Rainproof.
Type 3R enclosure - Rainproof.
Caution: This assembly contains electrostatic sensitive device.
Tested to comply with FCC standards for home or office use.
Complies with 21 CFR 1040.10 and 1040.11.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
There are various CE symbols for CE compliance.
Issue: 01