Wi-Fi Service; Wi-Fi Standards And Certifications; Wi-Fi Gui Features; A-240Z-A Cpe Considerations And Limitations - Nokia 7368 Product Manual

Intelligent services access manager cpe
Hide thumbs Also See for 7368:
Table of Contents

Advertisement

 
A-240Z-A unit data sheet
5.9.1
5.9.1.1
5.9.1.2
5.9.2
50
 

Wi-Fi service

A-240Z-A CPEs feature Wi-Fi service as well as voice and data services. Wi-Fi is a
wireless networking technology that uses radio waves to provide wireless HSI and
network connections. This CPE complies with the IEEE 802.11 standards, which the
Wi-Fi Alliance defines as the basis for Wi-Fi technology.

Wi-Fi standards and certifications

The Wi-Fi service on A-240Z-A CPEs supports the following IEEE standards and
Wi-Fi Alliance certifications:
compliant with IEEE 802.11 standards
certified for IEEE 802.11b/g/n standards
WPA support including WPA-PSK
certified for WPA2-Personal and WPA2-Enterprise

Wi-Fi GUI features

A-240Z-A CPEs have HTML-based Wi-Fi configuration GUIs.

A-240Z-A CPE considerations and limitations

Table
12
lists the considerations and limitations for A-240Z-A CPEs.
Table 12
A-240Z-A CPE considerations and limitations
Considerations and limitations
Call History Data collection (CPECALLHST) is supported, except for the following parameters:
RTP packets (discarded), far-end RTCP and RTCP-XR participation, RTCP average and peak round trip delay,
MOS, average jitter, number of jitter-buffer over-runs and under runs.
Some voice features are configurable on a per CPE basis, including Call Waiting, Call Hold, 3-Way Calling, and
Call Transfer.
The following voice features / GSIP parameters are configurable on a per-Client/ per-CPE basis (not
per-Subscriber):
Enable Caller ID and Enable Caller Name ID
Digitmap and the associated Interdigit and Critical timers and Enter key parameters
Warmline timer is enabled per subscriber, but the warmline timer value is configured per CPE and must have
a lower value than the Permanent time
Miscellaneous timers: Permanent, Timed-release, Reanswer, Error-tone, and CW-alert timers
Features / functions: Message waiting mode, WMWI refresh interval, DTMF volume level
Service Codes for the following features: CCW, Call Hold and Warmline
3FE-46615-AAAA-TCZZA
7368 ISAM CPE A-240Z-A Product Guide
Issue: 01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents