Safety Information - Nokia 7368 Product Manual

Install an A-240Z-A CPE

6.5 Safety information

50
Read the following safety information before installing the unit.
Danger 1 —
cause serious physical harm or death. Always use insulated
tools and follow proper safety precautions when connecting or
disconnecting power circuits.
Danger 2 —
have no live voltages present on feed lines or terminals. Use a
voltmeter to measure for voltage before proceeding.
Danger 3 —
connecting the enclosure to the utilities.
Caution —
exposure to direct sunlight can damage the unit.
Note 1 —
that may be applicable to this installation.
Note 2 —
•
The CPE should be installed in accordance with the
applicable requirements of the NEC or CEC. Local
authorities and practices take precedent when there is
conflict between the local standard and the NEC or CEC.
•
The CPE must be installed by qualified service personnel.
•
Indoor CPEs must be installed with cables that are suitably
rated and listed for indoor use.
•
See the detailed specifications in the
sheet
3FE-46615-AAAA-TCZZA
Hazardous electrical voltages and currents can
Make sure all sources of power are turned off and
Always contact the local utility company before
Keep indoor CPEs out of direct sunlight. Prolonged
Observe the local and national laws and regulations
Observe the following:
for the temperature ranges for these CPEs.
7368 ISAM CPE A-240Z-A Product Guide
A-240Z-A unit data
Issue: 01