Mitsubishi Electric MELSEC iQ-R Series Configuration Manual page 173

■ Program
• Although the dedicated instructions of MELSECNET/H can be used for programming, for some dedicated instructions, use
the string specification ("") when setting the start devices of the target station.
: Available
Instruction name
JP.READ, GP.READ
JP.SREAD, GP.SREAD
JP.WRITE, GP.WRITE
JP.SWRITE, GP.SWRITE
JP.SEND, GP.SEND
JP.RECV, GP.RECV
G.RECVS, Z.RECVS
J(P).ZNRD
J(P).ZNWR
J(P).REQ, G(P).REQ
Z(P).RRUN
Z(P).RSTOP
Z(P).RTMRD
Z(P).RTMWR
• No.254 (valid module during other station access) cannot be used to specify the network number of the dedicated
instructions. Specify the network number within the range of 1 to 239.
• From the personal computer connected to the MELSECNET/H interface board, access to a programmable controller using
md functions is possible.
Modules which can be mounted with the remote head module
Restrictions and precautions of when the MELSEC-Q series modules are used with the remote head module are same as
those of when the modules are used as the MELSECNET/H remote I/O station. For the restrictions and precautions, refer to
the manual of each module.
Availability














Remarks
Only the string specification can be used for (s2).
Only the string specification can be used for (s2) and (d3).
Only the string specification can be used for (d1).
Only the string specification can be used for (d1) and (d3).



Only the string specification can be used for (s2).
Only the string specification can be used for (d1).





Appendix 5 How to Use MELSEC-Q Series Modules
A
APPX
171