Lateral dimensions of the base unit with the DIN rail
This section describes the lateral dimensions when the base unit is mounted on the DIN rail.
DIN rail depth (D)
TH35-7.5Fe: 7.5
TH35-7.5AL: 7.5
TH35-15Fe: 15
DIN rail
adapter
DIN rail
adapter
The following table lists the dimensions (1), (2), and, (3) in the figure when (2) is the power supply module. (1) differs
depending on a base unit. (2) and (3) differ depending on the module used.
No.
MELSEC iQ-R series main base unit and extension base unit RQ extension base unit and MELSEC-Q series extension
(1)
8.9mm
(2)
110.0mm
(3)
118.9mm
5 INSTALLATION AND WIRING
112
5.4 Mounting Base Unit on the DIN Rail
(1)
5.7
Base unit
Internal surface of
a control panel
(3)
(2)
Power supply module
base unit
7.5mm
115.0mm
122.5mm